Thermal façade 10 cm thick, using a certified ETICS system.

Building on Kalaischrou 3-7:
Oak wood flooring with a minimum thickness of 14 mm.
Tiles 60×120 cm PEI 4, Grade A.
Dionysus Marbles A ́ & B ́ or Travertino, 2 cm thick.

Building on Porinou & Kalaischrou:
Oak wood flooring with a minimum thickness of 14 mm.
Tiles 60×60 cm PEI 4, Grade A.
Marbles Iris in bathrooms, 2 cm thick ́ or Travertino, 2 cm thick.
Marbles “Sinai” for terraces and staircase, 2 cm thick.

Wardrobes – Kitchens: Constructed from colored MFC with wooden countertops. Cabinets fitted with BLUM mechanisms or equivalent soft-close hardware.

Interior LED lighting, GOLA true handleless look, high quality aesthetics

All carpentry elements will be factory-manufactured, with precise assembly and smooth surfaces.

Profiles, hinges and runners will be of heavy-duty type, designed for wear resistance and long-term durability.

Freestanding washbasin, round or square, Ideal Standard Strada II or equivalent.

Wall-mounted washbasin mixer, concealed built-in installation, Ideal Standard Ceraline or equivalent.

Wall-mounted (concealed) toilet pans, with soft-closing mechanism, Ideal Standard Tesi II or equivalent.

Concealed cistern for wall-mounted toilet, Geberit Delta or equivalent Geberit Sigma 30 or equivalent.

Recessed shower tray with tiled floor, triplex glass enclosure, fixed or hinged glass panels, linear drain channel.

Concealed shower mixer, Ideal Standard Ceraline or equivalent.

Hand shower Ideal Standard Idealrain or equivalent.

Concealed ceiling-mounted shower head, with 15 cm brass arm. Ideal Standard Idealrain or equivalent.

Bathroom accessories [toilet paper holder, wall-mounted brush holder, hook, towel rail, shower shelf and stainless steel (INOX) paper box], manufactured by Bronze or equivalent.

Underfloor Heating – Air Conditioning – Domestic Hot Water (DHW)

Each apartment will have an autonomous heating and air conditioning system based on an air-to-water monoblock heat pump of high energy efficiency (category A++ or higher).

Heating of the spaces in each apartment shall be provided through an underfloor heating system. Control of the system is achieved through a room thermostat in each apartment.

Air conditioning of the main areas in each apartment is also provided by the Heat Pump (H.P.) and fan coil units of each apartment.

The production of domestic hot water (DHW) for each apartment prioritizes the use of solar energy through a suitably sized solar water heater, with supplementary support from the H.P.

Each autonomous air-cooled heat pump shall be inverter type, COP ≥4.5, EER ≥4.0, EN14511/14825, noise ≤48 dB(A), operation up to -20°C energy class A++ or higher.

For the air conditioning of the main spaces of the apartments, duct-type fan coil units will be provided, installed within false ceilings, with soundproof casing.

The solar water heater is intended for domestic hot water (DHW) production in each apartment, with solar energy as the primary heat source and support from a heat pump (H.P.) when required.